You picked a ZPAP M70 because you like rifles that run and look the part. Now you want to dial it in with factory-fit upgrades that keep the soul of the platform while pushing performance forward. Good news: ZastavaArms offers a deep bench of ZPAP M70 accessories that fit, function, and look right. No weird adapters, no sketchy tolerances. Let’s kit out your rifle the smart way.
Start With Solid Optics
If you want a dependable optic on a ZPAP, you start at the side rail.
Zastava’s M70 Scope Mount locks to the factory rail with a QD lever, holds zero, and gives you a top Picatinny rail for red dots or LPVOs. You get an adjustable lever for a snug fit and an angled rail section for accessories. That keeps your ZPAP M70 accessories list clean and practical.
Running an underfolder? Use the dedicated Zastava M70 Underfolder Scope Mount. It interfaces with the same rail and maintains the low, consistent height you need for a natural cheek weld.
Upgrade Furniture For Fit, Control, And Style
Zastava’s factory-fit furniture sets keep the rifle’s Serbian DNA while improving ergonomics. Walnut Furniture Sets include the stock, pistol grip, and both handguards, ready to install with hardware.
You keep the classic profile, pick a finish you like, and avoid guesswork on fit. If you want a different vibe, check the limited-run Anniversary and Battleworn sets. Each option sits right on M70 pattern rifles, including the ZPAP M70. That’s the cleanest path to a cohesive look and consistent handling.
If you want a stock swap with a different geometry, Zastava offers triangle-style stock options sized for the M70 pattern. You keep the rugged lines and gain a firm shoulder index for faster repeatability.
Feed It With Factory Magazines
Magazines set the tone for reliability.
Zastava’s polymer AK47 magazines bring steel-reinforced locking lugs, a last-round BHO follower, and a 30-round capacity. You can also stock up with multi-packs or go long with 40-round Serbian polymer mags when the mission calls for it.
These mags seat confidently and run hard, exactly what you want in your baseline ZPAP M70 accessories kit.
Lock Your Muzzle Setup
Heat cycles and recoil try to walk the muzzle devices loose. You can shut that down with Zastava’s Hot Lock. It’s a purpose-built, water-soluble high-temp compound that holds brakes, compensators, and suppressor mounts tight under abuse.
When you want removal, water dissolves it. That simple upgrade protects threads, preserves POI, and keeps your gas path aligned. Small investment, big peace of mind.
Go Suppressor-Ready With Factory Support
If you plan to run a can on your ZPAP, set the table right now. Zastava’s Suppressor lineup and accessory category make the process straightforward. Grab the correct HUB adaptor if your setup calls for it, then confirm bore alignment with Zastava Alignment Rods in 7.62 (.30 cal).
You build confidence before the first shot, and you protect that perfect baffle stack you paid for. This sits near the top of ZPAP M70 accessories that punch way above their price.
Verify Alignment Before You Send It
Alignment rods deserve their own spotlight. Slide the rod through your mounted suppressor and barrel; you confirm concentricity in seconds. You catch issues at the bench, not on the firing line.
Zastava lists dedicated rods for common calibers, including the 7.62mm/.30 cal size that ZPAP M70 shooters need most. You avoid strikes, you protect your gear, and you keep accuracy where it should be.
Keep A Bench Of Factory Parts Handy
Things wear. Springs take a set. Extractors and firing pins do real work. Zastava’s ZPAP M70 parts menu lets you replace common wear items with factory-spec components, like selector levers, magazine catches, recoil assemblies, rear sight leaves, and more.
You keep reliability high and avoid downtime because everything matches the rifle’s pattern and tolerances. That’s one of those ZPAP M70 accessories decisions that pays off when you least expect it.
Build, Zero, And Enjoy
Once you mount your optic on the Zastava side rail, you can follow Zastava’s own guidance for sliding and locking the mount, then zero with confidence.
Factory instructions and how-to content focus on correct rail engagement and repeatability. Exactly what you need to get a crisp, durable zero.
Quick-Start Loadout
- Optics Mount: Zastava M70 Scope Mount or Underfolder Scope Mount – QD lever, side-rail correct, holds zero.
- Furniture Set: Walnut or Anniversary/Battleworn sets complete kits with hardware, M70 pattern fit.
- Magazines: 30-rd polymer BHO mags (or 40-rd option), steel-reinforced where it counts.
- Muzzle Management: Hot Lock on your brake or mount high-temp hold, water-soluble removal.
- Suppressor Prep: HUB adaptor as needed, plus a 7.62 alignment rod for pre-flight checks.
- Sling Setup: QD Sling Swivel and buttstock swivel kit for secure carry.
- Maintenance Buffer: A handful of factory wear parts for quick fixes.
Final Thoughts
You don’t need a mountain of gear to transform a great rifle into your rifle.
Focus on ZPAP M70 accessories that lock fundamentals: a proper rail-mount for optics, furniture that fits the pattern, magazines that feed every time, Hot Lock to keep the muzzle sorted, alignment rods for suppressor safety, and a simple sling setup.
ZastavaArms gives you factory-fit solutions across that list, so you spend less time tinkering and more time shooting.
